LED curing light Starlight S
Handpiece of LED curing light Starlight S
LED curing light Starlight S
Handpiece of LED curing light Starlight S

LED curing light Starlight S

Manufacturer
Mectron
Application
Built-in dental unit LED lamp for light curing of composite filling materials
Power types
2 curing modes: "fast" mode (10 sec.) and "slow rise“ mode (20 sec.)
Country of original
Italy
Warranty
3 years
REF. №
5100003

Built-in version of light Starlight S for curing composite filling materials

The starlight s can be easily built into a dental unit – the ergonomic handpiece can be positioned simply in the quiver (its holder). Starlight s has two curing modes: „fast” (10 sec) and „slow rise” (20 seconds with slow progression in the first 3 seconds).

The main advantage of this curing lamp is the possibility of its integration into a dental unit. The Starlight S curing light is unusually ergonomic and has a modern design.

A characteristic feature of LED curing light is the absence of a means for additional cooling. Starlight S is absolutely noiseless.

The handpiece is fitted with the electronics needed to operate the Starlight S, which makes it as simple as possible to use the device in a dental unit and gives a unique overall aesthetic appearance.

Like Starlight Pro, Starlight S has two operating modes of curing: "fast" (10 seconds) and "Slow rise" (20 seconds with a rise for the first 3 seconds).

The light emission of Starlight S is more aimed at the spectrum of composites compared to other halogen lamps. This gives excellent photopolymerization results at lower power and without overheating.

Device compliant to Dir. 93/42/CEE: Class IIa
Classification as per EN 60601-1:

II
Type BF
IP 20 (unit)

Power supply voltage: 24 Vac 50/60 HZ  
33 Vdc supply double insulation
Max. power absorbed:9W
Fuses315 mA T (Not included in the mectron supply)
Device for intermittent operation: 120 sec ON 40 sec OFF
Light source:High-luminosity LED with optics  
Dominant wavelength: 440 - 465 nm  
LED light emission: > 1.400 mW/cm2  
Average life: 1,800,000 cycles, 20 seconds each
Optical fiber:

Diameter 8 mm
Composition: Drawn coherent fibers surfused in transparent quartz  
Autoclave sterilizable (max. temp. 135°C for 20 minutes - max. 500 cycles).

Exposure:Fast: Exposure time 10 seconds - Acoustic signals indicating start and end of exposure  
Slow rise: Exposure time 20 seconds - Acoustic signal at the start, after 10 seconds and at the end of the 20 seconds  
The cycles can be stopped or repeated at any time
Operating conditions:from +10°C to +40°C
Relative humidity from 30% to 75%
Pressure of air P: 800hPa/1060hPa
Transport and storage conditions: from -10°C to +70°C
Relative humidity from 10% to 90%
Pressure of air P: 500hPa/1060hPa
Weights and sizes65 g 
 L 148 mm, max. Ø 22 mm
Warrantydevice 3 years
  • Starlight S handpiece
  • Starlight S cord
  • Optical protection
  • Black optical fiber

Do you want to buy this product?

Leave your contact details, we will contact you by phone

By pressing «Submit» button, you accept the terms of user agreement