LED curing light Starlight ORTHO

Manufacturer
Mectron
Application
Cordless curing light for curing composite filling materials
Country of original
Italy
Warranty
3 years
REF. №
5100084

Designed for the special needs of orthodontist 

  • cures all current materials used in orthodontics efficiently and fast
  • exposure times of 5 sec and 10 seconds
  • allows curing of a few brackets up to a whole quadrant, with the push of one button

Light spectrum

график диапазона длин волн полимеризационной стоматологической лампы Starlight Ortho    

Starlight lamps are effective on camphoroquinone, used as photoinitiator in 98% of the materials on the market. They emit light on a wave-length comprised between 440 nm and 480 nm with a peak at 460 nm.


Technical advanteges of Starlight ORTHO for orthodontist 

Optical fiber
Sterilizable, coherent, fibre optics conductor, Ø 8 mm

Click-clack connection

Exclusive connection in metal ensures an optimal light beam transmission

Optical protection
Sterilizable, simple to apply to the optical fibre

Low temperature

It does not require a fan as it develops no heat – silent

Hygiene

The smooth, continuous and compact surface enables perfect disinfection

Processor control

Constant light power regardless the charge level

Low battery warning 

The double acoustic signal is activated when the battery is still sufficient for 6 cycles

Charging station

  • green control LEDs indicating mains supply and signalling consent for charging process and power output
  • in case of problems a yellow LED will flash

Radiometer

  • integrated radiometer which checks the power output
  • result indicated by a LED

Accumulator

  • lithium-ion battery with no memory effect   
  • charging time only 120 minutes
  • capacity of 640 cycles with 5 seconds
Device compliant to Dir. 93/42/CEE: Class I
Classification as per EN 60601-1:

II
Type B
IP 20 (recharging unit)
IP 20 (handpiece)

Power supply voltage: recharging unit: 100-230 Vac 50/60 Hz 15 VA
handpiece: lithium-ion battery, 3.7 V 1100 mAh
Charging time:About 2 hours
Device for intermittent operation: 120 sec ON 40 sec OFF Max 3 times running
Light source:High-luminosity LED with optics  
Class 2 M (IEC 60825-1) LEDs  
Dominant wavelength: 440 - 465 nm  
LED light emission: > 1.400 mW/cm2  
Average life: 3,600,000 cycles, 10 seconds each
Optical fiber:

Diameter 8 mm
Composition: Drawn coherent fibers surfused with quartz  
Autoclave sterilizable (max. temp. 135°C for 20 minutes - max. 500 cycles).

Exposure:Exposure time 5 seconds - Acoustic signals indicating start and end of exposure  
Exposure time 10 seconds - Acoustic signal at the start, after 5 seconds and at the end of the 10 seconds  
The cycles can be stopped or repeated at any time
Operating conditions:from +10°C to +35°C
Relative humidity from 45% to 85%
Pressure of air P: 800hPa/1060hPa
Transport and storage conditions: from -20°C to +40°C
Relative humidity from 45% to 85%
Pressure of air P: 500hPa/1060hPa
Weights and sizesRecharging unit: Weight 555 g 
L - W - H 96 x 120 x 58 mm  
Starlight pro handpiece: Weight 105 g 
 L 198 mm, max. Ø 23 mm
Warrantydevice 3 years
  • Starlight ORTHO handpiece
  • Starlight ORTHO charger
  • Power Cord
  • 8 mm optical fiber, black with metal click-clack connection
  • Optical protection

Do you want to buy this product?

Leave your contact details, we will contact you by phone

By pressing «Submit» button, you accept the terms of user agreement