Final drill

Drills colour sequence

The drills are equipped with a coloured band on the tang which identifies the diameter. 
The table represents the colour sequence to be followed in the perforation stages during the preparation of the implant site according to the diameter of the implant chosen.
The surgical organizer BLUE BOX shows the colour coding on the coloured grommets which allows for the immediate distinction of the correct placement of the drills.

This allows for the completion of the implant site with widening suitable for housing the implant.
The WAY® system has final drills for all of the implant diameters and lengths in order to guarantee that the surgical procedure is simple and fast.
For the 3.8 mm diameter, use the relative final drill; for the 4.5 and 5.5 mm diameters, use the drills in sequence with the lesser diameter until that of the corresponding diameter.

	Diameter (mm)	Height (mm)
	3,4	9
	3,4	11
	3,4	12
	3,4	13
	3,4	15

	Diameter (mm)	Height (mm)
	3,8	5
	3,8	6,5
	3,8	8
	3,8	9
	3,8	10
	3,8	11
	3,8	12
	3,8	13
	3,8	15

	Diameter (mm)	Height (mm)
	4,5	5
	4,5	6,5
	4,5	8
	4,5	9
	4,5	10
	4,5	11
	4,5	12
	4,5	13
	4,5	15

	Diameter (mm)	Height (mm)
	5,5	5
	5,5	6,5
	5,5	8
	5,5	9
	5,5	10
	5,5	11
	5,5	12
	5,5	13
	5,5	15

Final drill stop:

Used to achieve excellent control of the perforation depth eliminating risks of lesion in the anatomical absolute respect zones. The diameter of the stop must correspond with the diameter of the drill used.